Pages - Menu

Showing posts with label Construction. Show all posts
Showing posts with label Construction. Show all posts

Tuesday, April 24, 2012

Operating a Bulldozer Requires Special Safety Rules

Operating a Bulldozer Requires Special Safety Rules


The bulldozer was invented primarily for farm work such as ploughing fields. It has become more powerful and sophisticated with time and modernization of heavy equipment. Learning to handle this giant earthmover requires the operator to know certain safety rules to keep everyone safe.

If you haven’t seen a bulldozer, than you may not realize the massive size of this heavy equipment. This monster machine’s pure size, if not operated correctly, can cause injury and even death to the operator, the ground crew and destruction to anything else in its way — including other equipment.

We all heard about general heavy equipment safety tips but there are safety rules that need to be followed specifically for the bulldozer.

Bulldozer safety tips :



-->

Only qualified and trained drivers should operate a bulldozer. This isn’t an equipment anybody with can just hop in and operate. In fact, if there is just one bulldozer operator on the team, than he or she should be the sole operator — no substitutions even if the need may arise.

Common sense safety steps such as wearing a safety belt need to be followed. A safety belt may just save you from head injury.

Before attempting to work, operators must make sure nothing is obstructing the area and that the machine and all parts are working properly. The horn is one thing that should be tested.

Communication and inspection of the bulldozer area work site is extremely important. Operators should coordinate with the traffic department and make sure there is a lead person who will control and take responsibility of the traffic while work is in progress. Road blocks or flagman can be utilized to keep areas safe for bulldozer use.

Bulldozer operators should get in the habit of looking up when conducting inspections. This is because bulldozers can actually run into overhead power lines that might cause a possible accident. This is the same for looking below since a trench or an excavation area can cause mechanical and structural damage to the equipment as well as possible risk for injury to the operator

Safety is important in handling any kind of equipment, but specific safety tips should be followed for the bulldozer operator. A good professional heavy equipment school can help you learn about those tips and rules. Learning the important of safety before getting in the driver’s seat can save a life — maybe yours.

Friday, December 16, 2011

Reducing struck by injuries

Struck-by hazards include objects ejected from a power tool – such as a nail gun – as well as rolling, moving or sliding objects, such as a moving vehicle. OSHA offers the following recommendations to help workers prevent struck-by injuries:

Heavy equipment

Avoid heavy equipment that is being operated, and remain alert to the location of all heavy equipment regardless of whether or not it is in use.

Stand clear of loads that are being lifted or dumped.
Exercise caution around unbalanced loads.
Never work under suspended loads.
Stay outside of the swing radius of cranes and backhoes.
Wear hard hats in areas where objects may fall from above or if any head trauma may occur because of fixed objects.
Inspect hard hats routinely for dents, cracks or deterioration.

Motor vehicles

Check vehicles before each shift to confirm that parts and accessories can be operated safely.

Bulldozers and scraper blades must be lowered or blocked when not in use. Do not exceed the rated load or lift capacity of any vehicle. Use a cab shield or canopy to protect a driver hauling materials in a vehicle loaded by cranes or power shovels, and wear safety belts.

Vehicles should only be driven on grades or roadways that are safely constructed. Wear protective clothing, such as red or orange vests, to ensure workers are highly visible, and wear reflective materials when working at night.

Avoid situations in which an escape route is not available.

Traffic should only be directed by flaggers.

Check all warning signs.

Thursday, December 15, 2011

Protect Worker on Foot

Highway construction zones can create a hazardous environment for workers. According to NIOSH, workers are susceptible to injuries from moving construction vehicles and equipment within work zones, as well as from passing motor vehicle traffic.

NIOSH offers the following tips for working in construction zones :

Traffic control plans

Close the road completely and reroute traffic whenever possible.
Force traffic moving in both directions onto one side of the road.
Set up traffic control within a reasonable time before construction begins.
Keep the dimensions of the work zone suitable for the work that is being conducted.

Stop work temporarily until safe conditions are provided.
Design the workspace to reduce blind spots.

Visibility measures

Provide workers with high-visibility equipment and gear.

Use signage, warning devices and concrete barriers in a consistent manner throughout the work zone.

Lower the height of lighting equipment to reduce glare for motorists.
Use glare-free light balloons and glare screens.
Implement portable lighting and equipment-mounted lighting.
Evaluate worker performance under various lighting and weather conditions.
Equip vehicles with additional mirrors or alarms to help workers keep track of objects behind vehicles.

Reviewing the construction area

Set up a process for reviewing near-miss incidents and hazards to eliminate safety risks.

Designate areas around operations where workers are prohibited, such as the blind spots of a dump truck.

Distribute worksite-specific materials, such as an Internal Traffic Control Plan, to employees at safety meetings.

Perform regular maintenance checks before using equipment and verify that problems are corrected.

Subscribe via email

Enter your email address:

Delivered by FeedBurner